Installing The Mount Adapter - HyperX QuadCast S Manual De Usuario

Installing the Mount Adapter

1. Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8"
and 5/8" thread sizes.
2. Remove both the thumb screw and nut from the microphone stand.
3. Remove the microphone stand from the microphone.
4. Align the mount adapter with the microphone mount holes and secure the adapter with the thumb
screw and nut.
Document No. 480HX-HMIQ1S.A01
TM
HyperX QuadCast S Page 16 of 17