Connecting Devices Via Bluetooth - Medion LIFE S61388 Manual De Instrucciones

9. Connecting devices via Bluetooth®
In Bluetooth mode, you can receive audio signals wirelessly from an external
Bluetooth-enabled audio output device. Make sure the two devices are not more
than 10 metres apart.
Only one Bluetooth device can be paired with the soundbar at a time.
To connect a Bluetooth-enabled audio output device, proceed as follows:
 Switch on the soundbar.
 Then press the MODE button on the soundbar or remote control until BLUE is
shown on the display.
The device is now in connection (pairing) mode.
The soundbar attempts to automatically connect itself to the last audio
output device connected via Bluetooth. If this is not possible, the device
remains in search mode and BLUE flashes on the display.
 Switch on the Bluetooth function on your audio output device and activate
search mode on it to pair the two devices.
For more information about the Bluetooth function of your audio
output device, please refer to its user manual.
The device name of the soundbar "MD 43388" will be displayed in the device list on
your audio output device as soon as the signal is found.
 Select the soundbar and pair the two devices. If you are prompted to enter a
password, enter "0000".
Device pairing is complete when BLUE lights up continuously on the display and
the soundbar emits an acoustic signal.
 To disconnect an active Bluetooth connection, press and hold the MODE button
on the remote control or the soundbar until BLUE flashes on the display and an
acoustic signal is emitted from the soundbar.
 To re-establish the Bluetooth connection with the last connected device, press
and hold the MODE button on the remote control or soundbar until BLUE
lights up on the display continuously and an acoustic signal is emitted from the
soundbar.
60