3
1
3
2
D
4
4
<For tablet>
4
3
Open the display
<Only for model with keyboard base>
A Pull out the handle.
l If you do not pull out the handle before opening the display, the computer may fall over due to the
weight of the display.
B Rotate the latch (D) to the arrow direction.
C Hold the dents with both hands, and lift the display slightly.
D Hold the side of the computer with either of your hands and then lift up the display to open.
IMPORTANT
l Do not open the display wider than necessary (180° or more), and do not apply excessive pressure to the
LCD. Do not open or close the computer holding the edge of the LCD segment.
4
Turn on the computer
Press and hold the power switch
IMPORTANT
l Do not press the power switch repeatedly.
E
l The computer will be forcibly turned off if you press and hold the power switch for four seconds or longer.
l Do not perform the following operation until the First-time Operation is completed.
F
<Only for model with keyboard base> Touching the release lever (E) and detach lock (F)
<Only for model with keyboard base> Detaching the tablet from keyboard base
Disconnecting the AC adaptor
Pressing the power switch
<Only for model with keyboard base> Closing the display
Any changes from the default setting of the Setup Utility
l Once you turn off the computer, wait for ten seconds or more before you turn on the computer again.
l When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU.
Wait until the computer cools down, and then turn the power on again. If the computer does not power on
even after cooling down, contact Panasonic Technical Support (è
Manual).
until the power indicator
lights.
Operating Instructions - Reference
13