List Of Spare Parts - Kettler Kiddi-O 8452-200 Instrucciones De Ensamblado

tightened firmly. Attention: once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be replaced.
■ When assembling plastic grips: The grips can be pushed onto the handlebars more easily if they
are first soaked in warm water.
■ Please keep original packaging of this article, so that it may be used for transport at a later date,
if necessary.
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition
of tubing plugs).
List of spare parts page 18‐19
When ordering spare parts, always state the full model number, spare‐part number, the quantity
required.
Example order: Model # 8452‐300/ spare‐part no. 6181.06.00/ 1 piece
Please keep original packaging of this article, so that it may be used for transport at a later date, if
necessary. Goods may only be returned after prior arrangement and in (internal) packaging, which
is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report! Important: spare part
prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required,
this should be clearly stated on the order by adding the words „with fastening material".
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly
and safely (local refuse sites).
KETTLER International Inc. ∙ 1355 London Bridge Road ∙ VA 23453 USA
www.kettlerusa.com
4