Turbosaver TS-SV30 Manual Del Usuario página 12

SETUP
(clamp & pot)
Sous Vide circulator requires a 6-15L container or pot.
Firmly lock the product by clamping it on the side of your container.
SETUP
(temp./timer)
1
Plug it into the outlet. The "Power " icon and working lamp will flash and it will enter the
standby mode.
Press the "Power " icon to enter the setting mode. You will hear a sound of beep.
2
Temperature setting. Slide the scroll wheel to set the temperature.
3
Time setting. Press the "Watch" icon to set the time. You can find the timer blinks.
First slide the scroll wheel to set hour, then press "Watch" again to set the minute.
The timer will countdown when it meets the setting temperature.
4
Press the "Power" icon to confirm the setting and the unit will work. If you want to chan-
ge the setting, press and hold the "Watch" icon for 3 seconds, and then repeat the setting
as above.
The unit will stop automatically when it runs out of time and an "END" icon will show on
the screen.
5
Press and hold the "Power" icon for 3 seconds to stop.
12