System Requirements; Product Setup - D-Link DCS-2332L Guía De Instalación Rápida

SySTEM REQUIREMENTS

• computer with microsoft Windows
• pc with 1.3GHz or above and at least 128mB Ram
• Internet explorer 7, Firefox 12, safari 4, or chrome 20 or higher version with java installed and enabled
• existing 10/100 ethernet-based network or 802.11g/n wireless network

PRODUCT SETUP

WINDOWS USER
Step 1:
locate the antenna included with your dcs-2332l, and attach it to the antenna connector located on
the side of the dcs-2332l.
Step 2:
carefully remove the rubber seal on the back of the dcs-2332l, and use the included ethernet cable to
connect the dcs-2332l to your network.
Step 3:
attach the external power supply to the dcs-2332l and also connect it to your wall outlet or power
strip. power is confirmed when the led power Indicator is lit green.
Step 4:
Insert the dcs-2332l driver cd in the cd-Rom drive. If the cd autorun function does not
automatically start on your computer, go to start > Run. In the run box type d:\setup.exe (where d:
represents the drive letter of your cd-Rom drive) and click ok. When the autorun screen appears,
click Set up your Cloud Camera and follow the on-screen instructions.
Step 5:
after configuring your dcs-2332l, you can remove the ethernet cable and carefully reinsert the rubber
seal.
DCS-2332L
®
8/7/Vista/Xp, or mac with os X 10.6 or higher
3