Service + Support - SNOWJOE AQUAJOE SJ-SHSBB-TAN Manual De Instrucciones

4. Using the M6x50 screw and s-type nut, secure the hose
holder in place (Fig. 5).
Fig. 5
M6x50 Screw
Operation
1. Wearing work boots or other appropriate close-toed
shoes, firmly step down on the base and push the primary
and secondary stakes completely into the ground (Fig. 6).
Make sure your steel garden hose holder is secure
before use.
m
WARNING!
Do not install your steel garden hose holder
in soft ground or mulch.
Fig. 6
Secondary
stake
2. Connect your water source to the rear inlet (Fig. 7).
3. Connect your hose to the front faucet (Fig. 7).
Fig. 7
S-type
nut
Base
Primary stake
Rear
inlet
Front
faucet

Service + Support

If your Aqua Joe SJ-SHSBB-TAN steel garden hose holder
®
requires service or maintenance, please call Snow Joe
Sun Joe customer service at 1-866-SNOWJOE
®
(1-866-766-9563) for assistance.
Model + Serial Numbers
When contacting the company or arranging service from an
authorized dealer, you will need to provide the model and serial
numbers, which can be found on the decal located on the steel
garden hose holder. Copy these numbers into the space
provided below.
Record the following numbers from your new product:
Model #:
S J - S H S B B -
Serial #:
4
T A N
+
®