Troubleshooting - Battipav LEGGERA 6401E Manual De Instrucciones

Battipav srl

TROUBLESHOOTING

THIS TOOL MUST ONLY BE REPAIRED BY TRAINED PERSONNEL.
Repairs must be carried out by trained personnel only, using original spare parts, otherwise you may
cause considerable danger for the user.
Malfunctions not related to a conformity defect that exists at the time of purchase are excluded from the
warranty. Exclusions include:
- Wear of materials (taking into account the average life of the product)
- Failure to comply with the recommendations contained in this manual.
- Maintenance and tampering carried out by unauthorized personnel.
- Use of non-original spare parts.
Problem
The cutting carriage is difficult to
slide.
The carriage moves jerkily.
The cutting wheel does not cut
correctly.
Cause
There are cutting residues on the guide
track.
The bearings of the cutting carriage are
damaged.
The bearings of the cutting carriage are
damaged.
The cutting wheel is worn.
The screw on the cutting wheel support
has become loose.
Solution
Clean cutting residue off the rod.
Contact the retailer for bearing
replacement.
Contact the retailer for bearing
replacement.
Replace the cutting wheel.
Check that the cutting wheel has been
adjusted correctly.
GB
13