OEG M 66 Instrucciones Para El Montaje página 2

Installation manual for actuators
Mixing valve installation
The mixing valve can be mounted and sealed with teflon sealing tape, yarn
and sealing paste or anaerobic synthetic resin. In case of sealing with anae-
robic synthetic resin, make sure that all the junctions are well degreased.
OEG mixing valves.
The valve position indication plate needs to be adjusted during the valve
installation. To adjust the indication plate, act as follows:
1. Remove the Seger circlip ring 1 from the valve shaft.
2. Put the indication plate 2 in the proper position
(see pictures 2, 3 and 4).
3. Refit the Seger circlip ring 1.
Installation manual
2