Setting Up Your Bookshelf Speakers - Insignia NS-B2111 Manual Del Usuario

Setting up your bookshelf speakers

To connect your speakers to your amplifier:
1 Loosen the screw-type knobs on the back of your speaker.
2 Remove 0.5" (10 mm) of insulation from the speaker cable.
3 Insert the bare wire into the opening at the base of the speaker
knob.
4 Tighten the knob.
5 Connect the + terminal of the speaker to the + terminal of the
amplifier. Repeat for the - terminal.
6 Test the security of the connection by tugging lightly on the cable
at the terminal.
7 Repeat steps 1-6 for the second speaker.
Caution: Do not let the bare speaker wires touch each other, this could
damage the speaker and amplifier.
Note: Make sure that each + terminal of the amplifier is correctly
connected to the + terminal of the appropriate speaker. If this is not
correct, the bass components will not be clear. Correctly connected
speakers will give you a stable, well-defined stereo output with a clear,
powerful bass sound.
2
www.insignia-products.com
NS-B2111 Bookshelf Speakers