Marineland Penguin 100 Power Filter Guía De Instalación Rápida

Start Here -
Verify Your Model
1
Model 100 Models 150 & 200
1
5
5
2
12 6
6
3
10
7
7
9
4
8
8
11
(1) Filter Cover (2) BIO-Wheel Cover (3) Impeller Housing (4) Impeller (5) Intake Tube (6) Mid-Level Intake Strainer
(7) Extension Tube (8) Strainer (9) BIO-Wheel (10) BIO-Wheel Bearings (11) Filter Box (12) Filter Cartridge
3
Assemble Intake
A. Attach Strainer to Extension Tube.
B. Insert Extension Tube into Mid-Level
Intake Strainer.
NOTE: Short end of Intake Tube must be inserted
Model
100 150 & 200
Adding Fish: Before adding any fish, dechlorinate your aquarium water (with BIO-Safe
Detoxifier) and allow your BIO-Wheel Power Filter to operate for 24 hours. Start with 2-3 fish per 10 gallons
of water. Add more fish gradually over a 4-6 week period.
Penguin Power Filter
Model 350
1
5
2 12
6
12
7
3 9
9
10
8
4
11
C. Attach Mid-Level Intake Strainer to Intake Tube.
D. Insert Intake Tube into Impeller Housing.
all the way down into Impeller Housing.
Models Model
350
2
1
Rinse Filter
A.
Cartridge thoroughly.
Install as shown
(blue side toward
2
3
back of Filter Box).
BIO-Wheel
B.
should rest securely
4
in BIO-Wheel
Bearings.
10
11
Model 100
4
Install Power Filter on back of aquarium
A.
frame, before adding water to Filter Box.
Fill Filter Box with water.
B.
Replace BIO-Wheel and Filter Covers.
C.
To start your system, just plug
it in. Adjust Intake, if desired
™ Tap Water
Quick Setup Guide
Install Filter Cartridge(s)
1.Replace Filter Cartridge every 2 to 4 weeks.
2.NEVER clean or replace BIO-Wheel. Discoloration
of material is normal and desirable. If excessive
buildup occurs, rinse gently with dechlorinated
water (room temperature) as needed.
3.Extra media slot is for inserting an additional filter
cartridge or adding other filtration media.
Models 150 & 200
Install and Fill
NOTE: Drip Loop
(for safety)
Questions or Missing Parts?
Call Customer Service at:
(800) 322-1266
Model 350
09/04 10537