JOOULS JOOULY Manual De Instrucciones página 12

If 'A' is without power, or you wish to change 'A', or change to another smart
▪
device, you first need to cancel the pairing of 'A' and then connect a new
speaker/device.
All speakers can be either a 'Master' or 'Slave' device.
▪
4. Using the Remote Control
The remote control is for playback as well as lighting functions.
If the RC does not work, check the battery isolation tab has been pulled out before initial
use.
Note: The button type 'CR2025' test battery is factory fitted and may not have full
charge. In this case insert a new battery.
If you want the JOOULY to play music without LED lighting, press the red "OFF" button
on the remote control.
If you want the JOOULY to play music with lighting again, press any of the colour
buttons.
Remote Control Button Description
ON OFF Turn Lighting On/Off
Play/Pause
Skip forward
Skip back
Volume down
─
Volume up

FLASH
STROBE Choice of
FADE Dynamic Light Modes
SMOOTH
Turn the Brightness Up or Down
Colour
Press RED GREEN BLUE etc. or WHITE
Buttons
for static colour selection
A
12