Cleaning And Care; Troubleshooting; Maintenance And Repair - Franke VITAL CT2.5L Manual De Instalación Y Servicio

EN

CLEANING AND CARE

Before performing any cleaning and care:
Read the general safety information
Z X
about cleaning in the chapter
„SAFETY INFORMATION".
Turn the appliance off.
Z X
General recommendations
Do not use steam cleaners or direct jets
of water.
Do not use coarse abrasive materials
or sharp metal. They could scratch the
surface.

TROUBLESHOOTING

The chiller does not work:
Make sure that the chiller is connected
Z X
and that the main switch is turned on.
Make sure that there is no power
Z X
failure. Make sure main water supply
is not turned off.

MAINTENANCE AND REPAIR

Make sure that maintenance on
Z X
electrical components is carried out
by the customer service.
Make sure that damaged cables are
Z X
changed only by the customer service.
When contacting the customer
X X
service, please provide the following
information:
– type of fault
– appliance model (Art.)
– serial number (S.N.)
Never use scouring pads, steel wool,
muriatic acid or other products which
could scratch or mark the surface.
Cleaning the appliance
To clean everyday dirt, use a soft cloth
or sponge with water and a suitable
cleaning agent.
We recommend using protective
cleaning agents.
Make sure there is no visible water
Z X
leakage in the connecting pipes and
that device has been connected to
the water supply.
This information is given on the data
plate. The data plate is attached on the
bottom side.
– 10 –