Microban MEDLINE ELEMENTS MDS89664ELMB Manual De Instrucciones Para El Usuario Y Garantía página 4

Part one: attaching Legs to main commode compartment
Below parts will be needed to assemble the legs to the main commode compartment
and seat.
L
A
B
L
D
C
Step 1: Line up the leg mainframes (B) with the main commode compartment (A).
Start by flipping the commode compartment (A) upside down. Match up the holes
on the leg mainframes (B) with the holes on the bronze brace (L) on the outside of
the commode compartment (A). The bronze braces (L) will be on the inside of the leg
mainframes (B). Ensure the tubular slot protruding from the back of the leg mainframe is
placed toward the back end of the commode.
Step 1 Step 2
Step 2: Use hand screws (C) to connect the leg mainframes (B) to the commode
compartment (A).
Insert hand screws (B) where holes align on the leg main frame (B) and bronze brace (L).
Hand tighten. 4 hand screws (C) will be needed to fasten each leg main frame (B).
See below for additional pictures on how to apply hand screws.
Picture 1: Insert screw through the leg main frame first and then through the bronze brace
Picture 2: Apply washer over screw and up against the bronze braze.
Picture 3: Take plastic screw piece and hand tighten over screw pressing washer up
against bronze brace.
Picture 4: Hand Tighten till hand screw is secure.
PIC 1 PIC 2 PIC 3 PIC 4
4 MEDLINE | GPI074-IM19 (Rev. 05-20-2015)