Battery Charger - Husqvarna 520iLX Manual Del Usuario

LED display
Red error LED flashing
The product does not start
Error LED is lit with red light
Battery
LED display
Green activate LED flashing
Error LED flashing
Error LED is lit

Battery charger

LED display Possible faults
Error LED Temperature deviation.
flashes
Overvoltage.
16
Possible faults
Overload.
Temperature deviation.
The power trigger and the acti-
vate button are pressed at the
same time.
Dirt in the battery connectors.
The product needs servicing.
Possible faults
Low battery voltage.
The battery is discharged.
Temperature deviation.
Cell difference is too much (1V).
Possible action
The cutting attachment is jammed. deacti-
vate the product. Remove the battery. Clean
the cutting attachment from unwanted mate-
rials.
Let the product cool down.
Release the power trigger and the product is
active.
Clean the battery connectors with com-
pressed air or a soft brush.
Contact your servicing agent.
Possible action
Charge the battery.
Charge the battery.
Use the battery in surroundings where tem-
peratures are between -10°C (14°F) and
40°C (104°F).
Contact your servicing agent.
Possible ac-
tion
Use the battery
charger in tem-
peratures be-
tween 5°C
(14°F) and
40°C (104°F).
Make sure that
the mains volt-
age is the
same as the
shown voltage
value on the
rating plate on
the product.
Remove the
battery from the
battery charger.
756 - 001 - 24.10.2018