Publicidad
PROGRAMMING THE ADVANCED-GAMING BUTTONS
1. Hold the program button down for 2 seconds. The center LEDs will slowly
flash red, signaling the controller is in program mode.
2. Press 1 of the following buttons (A/B/X/Y/LB/RB/LT/RT/Left Stick Press/
Right Stick Press) to relocate. The center LEDs will rapidly flash, signaling the
controller is in record mode.
3. Select 1 of the 4 Advanced-Gaming buttons. The center LEDs stop flashing,
signaling the Advanced-Gaming button has been set to your button of choice.
4. Repeat for the remaining Advanced-Gaming buttons.
Note: Programmed buttons will remain in memory even after disconnected.
RESETTING ADVANCED-GAMING BUTTONS:
1. Hold the program button down for 2 seconds. The center LEDs will slowly
flash red, signaling the controller is in program mode.
2. Press and hold the program button for 5 seconds to reset to no function.
4
All manuals and user guides at all-guides.com
Advanced-Gaming
Advanced-Gaming
Buttons
Buttons
TROUBLESHOOTING
For current FAQs, visit www.PowerA.com/support.
Q: Controller will not connect to Xbox One console?
A: Confirm your Xbox One console is powered "ON".
A: Confirm your TV is set to the proper video channel.
A: Confirm cable is properly connected to the Xbox One.
A: Confirm inline-release cable is properly connected.
Q: Controller is connected but has no function?
A: Confirm you are using the Player #1 controller. For more troubleshooting refer to your Xbox One console User Guide.
CONTACT/SUPPORT
For support with your authentic PowerA accessories, please visit the Support section of PowerA.com, email CustomerService@PowerA.com
5
Publicidad
