Technical Data; General Power Tool Safety Warnings - IKRA HHSI 5551 Manual Original

TECHNICAL DATA

Hedge trimmer
Rated voltage / Mains frequency
Rated input
Cutting length
Cutting capacity
Safety class
Weight
Noise information
Measured according to EN 60745;
1)
Sound pressure level L
1)
pA
Sound power level L
2)
WA
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745, Uncertainty K= 1,5 m/s
Vibration emission value a
h
Subject to technical alterations and amendments.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
SAFETY WARNINGS

General Power Tool Safety Warnings

WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term „power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool.Distractions can cause you to lose control.
2) Electrical safety
2000/14/ EG; Uncertainty K= 3 dB (A)
2)
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmo-
dified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and refrigera-
tors. There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
GB ENGLISH
HHSI 5551
230-240 V ~ / 50 Hz
550 W
456 mm
16 mm
II
2,6 kg
90,95 dB (A)
102 dB (A)
2
4,345 m/s
2
11