Before Use; Light Function - Casals VTA300 Manual De Instrucciones

INSTRUCTIONS FOR USE

BEFORE USE:

• Make sure that all the product's packaging has been removed.
• Ensure that the voltage indicated on the rating label matches the
mains voltage before plugging in the appliance.
INSERT A DRILL BIT:
• To open the drill's chuck, whilst completely switched off, take firm
hold of the back part of the chuck and turn the front part of the
chuck counter clockwise.
• Insert the drill bit, screwdriver bit, or other tool/accessory required
for the task, into the chuck. In order to obtain a secure fastening
of the bit, insert the bit as far as you can into the chuck. Take firm
hold of the back part of the chuck and turn the front part of the
chuck clockwise until it is firmly closed.
• In order to remove accessories from the chuck, follow the same
steps as indicated previously but in reverse order.
• WARNING! Always unplug the machine before carrying out any
work on it.
USE:
• Unroll the cable completely before plugging it in.
• Connect the appliance to the mains.
• Turn the appliance on, by using the on/off switch.
• Select the appliance function desired.
• WARNING: When the bit begins to penetrate concrete or comes up
against the reinforcement rods in the concrete, the tool may react
dangerously. Make sure you keep your balance by distributing your
weight evenly and keeping your feet in a safe position whilst hold-
ing the tool firmly in both hands to avoid dangerous reactions.
• To avoid a fierce start up, the appliance is turned on progressively.

LIGHT FUNCTION:

• The appliance includes a light function, which illuminates the work-
ing area under the appliance.