Maintenance & Safety; After Sales Service - Helite B'SAFE SDU Guia Del Usuario

5. MAINTENANCE & SAFETY
A. SAFETY ADVICES
• Never disassemble the components of the SDU sensor.
• Never open the SDU sensor.
• Always place the sensor on the bicycle frame on the seatpost or on the seat tube.
• Check the battery regularly (once a month) by placing the magnet over the round sign on the saddle sensor.
Please note that this check should be done in an environment of more than 10°C.
B. MAINTENANCE & RECYCLING
• You can leave the sensor on your bike all year round.
• The SDU saddle sensor is waterproof and resistant to different temperatures.
• Do not throw the saddle sensor in your bin. Bring it to a dump or bring it to your dealer.

6. AFTER SALES SERVICE

A. EXCHANGE
If you encounter any of the problems described below, please contact a dealer or contact us for repair or exchange of the product:
>> the activated (switched on) vest does not show any reaction when you place the magnet over the sensor.
>> the SDU saddle sensor flashes red when you place the magnet over the round sign during the first 5 years of purchase.
After sales service: Contact us via mail: sav@helite.com or via telephone: +33(0) 3 80 35 48 26
B. WARRANTY
The B'Safe airbag system (vest + saddle sensor) comes with a 2 year warranty. You can extend the warranty by 2 years if you register the product within 3
months after your purchase at my.helite.com.
User Guide - Saddle Sensor
GREEN LED: BATTERY OK
RED LED: LOW BATTERY
You need to change the SDU sensor.
A beep sound on the vest: the saddle sensor
and the vest are associated.
GOOD TO KNOW GOOD TO KNOW
To delete all the sensors that are associated
with the vest, press the button
seconds.
16
for 8
17