Comelit MMON024B Manual De Instrucciones página 4

Mounting Guide art. MMON024B
Wall or Other Mounting with VESA Standard
CAUTION
: the wall mount must be a minimum of five times the monitor's net weight. To mount your
MONITOR to the wall or another surface, you need to purchase a VESA wall mount. Use four M4 x 8 mm
screws (not included) to attach the mount. The monitor mount VESA hole pattern is 75 mm x 75mm.
Note: Metric (M4 x 8 mm) is the type screw that should be used (do not use longer screws or the monitor
may be damaged).
1. Before mounting the monitor, remove the base riser (vertical portion of the base) by removing the two
screws at the top with a screwdriver. Then the base and the riser can be removed. In order to prevent
losing the two screws, we suggest replacing the screws in their original holes.
2. Attach the VESA mount (75 mm x 75 mm) plate to the rear of the monitor and follow all of the
instructions provided with the mount to complete the mounting process.
SCREW
2