Keypad Automower; Menu Structure; Browse Between Menus - Husqvarna AUTOMOWER 105 Manual Del Usuario

3.6 Keypad Automower

310/315/315X/420/430X/440/450X
The keypad consists of 6 groups of buttons:
• The START button is used to activate the
product. This is normally the last button to
be pressed before closing the hatch.
• The BACK and OK buttons are used to
navigate in the menu. The OK button is also
used to confirm settings.
• The arrow keys are used to navigate in the
menu but also to make selections in certain
setting options.
• The MENU button is used to go to the main
menu.
• The PARK button is used to send the
product to the charging station.
• The number keys are used to enter settings,
for example PIN code, time or exit direction.

3.7 Menu structure

The main menu for Automower
®
options. Automower 310 has 6 options and
®
Automower 315/315X has 7 options. The main
®
menu for Automower 420/430X/440/450X offers
8 options.
3.8 Submenus
There are a number of submenus under each
option. You can access all the functions to set the
product settings via the submenus.
Certain submenus contain options that are ticked
off to the left. This means that these options are
selected. Check or uncheck the box by pressing
the OK button.

3.9 Browse between menus

Browse through the main menu and submenus
with the help of the multi-choice buttons
14 - Installation
(Automower
(Automower
440/450X). Enter values and times using the
number keys and confirm each selection with the
multi-choice button marked OK. Press BACK to
®
go up a step in the menu or keep the HOME
(Automower
(Automower
button pressed in for 2 seconds to go directly to
the main menu.
3.10 Main menu
®
105 offers 4
®
105) or the arrow keys
®
310/315/315X/420/430X/
®
105) alternatively MENU
®
310/315/315X/420/430X/440/450X)
Timer
The lawn should not be cut too often to
obtain the best mowing result.
Consequently, it is important to limit
the operating time using the timer
function if the work area is less than
the product's work capacity. The timer
function is also an ideal tool to control
which periods the product should not
mow, for example when children are
playing on the lawn.
Cutting height
Applicable for Automower
440/450X
The cutting height can be varied from
MIN (1) to MAX (9). During the first
week after a new installation, the
cutting height must be set to MAX to
avoid damaging the loop wire. After
this, the cutting height can be lowered
one step every week until the desired
cutting height has been reached.
Security
In this menu, settings relating to
security and the connection between
the product and the charging station
can be made. There are 3 security
Low , Medium ,
levels to choose from:
High .
Messages
Applicable for Automower
310/315/315X/420/430X/440/450X
1194 - 001 - 23.05.2019
®
420/430X/
®