FujiFilm Instax Square SQ20 Manual De Instrucciones página 34

EN
SPECIFICATIONS (Continued)
Printer
Film
Photo capacity
Film size
Image size
Supported image size
Printing solution
Printing levels
Supported image format
Printing time
Print timing
Printing function
Reprint
Digital zoom
Others
LCD monitor
External interface
Power supply
Charging function
Printing capacity
Charging time
Dimension
Weight
Operating environment
* Specifi cations above are subject to change for improvement.
34
FUJIFILM Instant Film "instax SQUARE" (Purchased separately)
10 prints/pack
86 mm x 72 mm
62 mm x 62 mm
800 x 800 dots
12.5 dots/mm (318 dpi, 80 μm dot pitch)
256 levels per color (RGB)
JPEG (Some images saved with a photo editing/processing software may not
be displayed or printed.) JPEG fi les captured from a movie fi le can be printed.
Approx. 12 seconds
Printing shortly after shooting/Printing after selecting image
Images on built-in memory/micro SD card
Printable up to the past 50 prints (Up to 50 images stored in print history)
Up to 4 X in shooting/printing
2.7-in. (6.9 cm) TFT color LCD monitor, Pixels: Approx. 230k-dots
Micro USB Micro-B (For charging/fi le copying)
Li-ion battery (Built-in, Cannot be removed.)
Built-in
Approx. 100 prints (From when the battery is charged fully)
* Varies depending on the conditions of use.
Approx. 2 to 3 hours (Using 0.5 A USB port)
* Varies depending on air temperature.
119 mm x 50 mm x 127 mm (W x D x H)
390 g (excluding fi lm pack and memory card)
440 g (including fi lm pack and memory card)
Temperature: +5 °C to +40 °C
Humidity: 20 % to 80 % (no condensation)