Lumiscope 2220 Manual De Instrucciones página 8

Taking a temperature reading from an object:
• Press the POWER button to turn the device on.
• Press the MODE button for one second. Ensure the unit
is in Object Scan mode (this is shown on the LCD).
• Press and hold the SCAN button, while aiming at the
desired object. Neither a beep sound nor a flashing LED
will occur while in Object Scan mode. For best results,
maintain a distance of 6 cm ~ 8 cm (2
tween the object and the Non-Touch Thermometer (see
Figure 6).
• Release the SCAN button and withdraw the thermometer.
Results will display on the LCD.
Measuring Temperature
3
8
/ " ~ 3 1 / ") be-
8 8