Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS ITEM
1
2
3
4
5
6
7
1.
Feeding cover
2.
Spatula
3.
Lid
4.
Glass Jar
5.
Blending Knife
6.
Blending knife stand
7.
Main Machine
8.
Grinder Jug
9.
Grinder base
INSTALLATION
8
9
1.
Insert the Blade in the jar
2.
Fix it using the espatula
3.
Fix the jar on the machine
4.
Cover the Glass jar
5.
Ready to use
1.
Clean the measuring cup, cover and
jar(except main body)and so on before
first using.
2.
To make sure the unit is turned off and not
to connect before installation.
3.
First ring the jar sealed ring into blade
base, then enclose the blade base into jar,
last rock the jar slightly causing it to lock
into place.
4.
Put the jar base on the top of motor
mainbody, please pay attention to match
the position of jar and the bulge of the
motor main body. Fill the jug with the
desired foods. please ensure the water
not spill over from cup.( Maximal water
capacity can not exceed 1500 ml)DO
NOT USE THE UNIT WITHOUT ANY
MATERIAL INSIDE.
5.
Put the cover on top of the jar and push
it down. Insert the measuring cup into the
cover and push it down.
OPERATION
1.
Connect the power.
2.
This unit have safety design, it doesn't
start if the jar is not install on motor main
>>
13
Publicidad
