Switching On The Product - nedis HPBT6050BK Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
Pairing the earphones to a Bluetooth audio
source
1. Rotate the lid A
earphones switch on automatically.
4
Tap and hold both earphone touch controls A
1.5 seconds to manually switch on the earphones.
2. The status indicator LED A
pairing mode is active.
3. Enable bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT6050BK" from the list of available Bluetooth
devices on your device.
Charging the product (image B)
1. Plug he USB-C cable A
charging case.
2. Plug the other end of A
adapter.
3. Plug the power adapter into a power outlet.
4. The Earphone charging indicator LED A
5
5. A
lights up blue when the earphones are fully charged.
4
The earphones and the charging case can charge
simultaneously.
6. The charging indicator LEDs A
progress of the battery.
7. Place the earphones into the respective slots A
close the lid A

Switching on the product

Tap and hold A
product on or off.
Making phone calls
With the earphones connected to a mobile phone via
Bluetooth, phone calls will automatically be redirected to the
earphones.
To answer an incoming call, tap A
To reject an incoming call, tap and hold A
seconds.
To end a call, tap A
To switch the call between phone and earphones, double
4
tap A
.
Controlling the music
2
Tap A
or A
Double tap A
3
to open the charging case. The
1
7
into the USB-C port A
7
into a computer or power
8
to charge the earphones.
2
4
and A
2
4
or A
4
to play or pause the music.
4
to increase the volume.
starts blinking to indicate
5
9
indicate the charging
for 1.5 seconds to switch the
2
4
or A
2
.
6
2
3
A
for
6
of the
blinks.
8
9
A
and
.
4
or A
for 1.5

Publicidad

Tabla de contenido
loading

Tabla de contenido