Home Decorators Collection AVONDALE GROVE 365-166-48 Guía De Uso Y Cuidado página 6

Assembly (continued)
3
Attaching the support leg and connectors
□
Locate the base panel (C) and place on a soft surface to protect the finish.
Line up and insert the long connector (CC) on the support leg (V) into the
unthreaded holes in the center of the base panel (C).
□
Attach the support leg (V) to the base panel (C) by turning a bolt (AA)
clockwise through the long connector (CC). Do not strip the
bolt (AA) by overtightening.
□
Locate the top trim (M) and place them on a soft surface
to protect the finish.
□
Insert two short connectors (BB) into the top trim (M) where indicated.
Press down firmly until flush.
□
Attach the short connectors (BB) by inserting two bolts (AA) and turning
clockwise. Do not strip the bolts (AA) by overtightening.
4
Attaching the front and back panels to
the base
□
Line up and insert two wood dowels (DD) into the unthreaded
holes in the side of the base panel (C). Line up the wood
dowels (DD) with the unthreaded holes in the front apron panel
(L). Press together until flush.
□
Line up the short and long connectors (BB & CC) in the base
assembly (C) with the unthreaded holes in the rear apron panel
(K). Press together until flush.
□
Insert five bolts (AA) into the short and long connectors
(BB & CC) on the base assembly.
□
Attach the front and rear apron panels (L & K) by turning
the bolts (AA) clockwise. Do not strip the bolts (AA) by
overtightening.
V
C
AA
BB
M
BB
AA
K
C
AA
CC
DD
6
AA
CC
L