Pelonis HO-0264 Manual Del Usuario página 4

Place the heater on a firm level surface free from obstructions, and at least 3 ft.
away from any wall and any other objects such as furniture, curtains, plants or
combustible material.
With the Power and Setting Control "C" in the "0" position, plug the heater
into a grounded 120V outlet.
Turn the heater "ON" by turning the Power and Setting control "C" clockwise
to your desired power setting (1, 2, 3 ). The Power Indicator Light "A"
will illuminate.
Turn the Thermostat Control "B" to your desired setting from LOW " " to HIGH "+".
Setting for Optimum Comfort: When the room reaches a comfortable temperature,
slowly turn the Thermostat Control "B" counter-clockwise until the heater turns off.
This is the point at which the thermostat setting equals the room temperature. At this
setting, the thermostat will automatically turn the heater on and off to maintain this
selected temperature.
This heater includes a safety tip-over switch, which will shut the heater off in case
it is tipped over. If at any time, the heater does tip over, please put the heater back in
the upright position (wheels on bottom, controls on top). The heater will resume its
normal operation.
This heater includes an Overheat Protection System that turns off the "A"
Power Indicator Light and shuts the unit off if it overheats due to abnormal conditions.
If this occurs, turn the heater "OFF," unplug it, and inspect and remove
any objects on or adjacent to the heater. Allow it to cool for a few minutes, plug it back
in, and resume normal operation.
3
OFF