Resumen de contenidos para Little Seeds 4017013COM
Página 1
BBBBBBBBBBBBBBB inside for Assembly Manual B52BB9PK Check us out! littleseedskids.com...
Página 2
Keep this Assembly Manual for future reference Two Adults recommended for assembly This product is not intended for commercial use Do NOT return this product! Follow little seeds on For missing or broken parts - Visit littleseedskids.com - Call 1-800-489-3351...
Do NOT return this product! Contact our friendly customer service team first for help Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Visit littleseedskids.com to view the limited warranty valid in the U.S and Canada Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it for less heavy lifting - Identify, sort and count the parts before attempting assembly...
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please beware to slow down and stop when screw is tight.
Página 5
Board Ident f lat on Not altual size T4017013010PK T4017013020PK T4017013030PK TOP PANEL LEFT SIDE PANEL RIGHT SIDE PANEL T4017013040PK T4017013050PK T4017013060PK BRACE BACK PANEL DRAWER FRONT T4017013070PK T4017013080PK T4017013090PK LEFT DRAWER SIDE RIGHT DRAWER SIDE DRAWER BACK lil leseedslidsllom...
Página 6
Board Ident f lat on Not altual size T4017013100PK T4017013110PK T4017013120PK DRAWER BOTTOM DRAWER SUPPORT RIGHT SIDE PANEL T4017013130PK T4017013140PK BACK PANEL APRON lil leseedslidsllom...
Página 7
Part List Altual size TPK0001 TPK0002 TPK0004 TPK0005 Cam Bolt Cam Loll 15-9 DOWEL 8 X 30 DOWEL 6 X 30 TPK0007 TPK0008 TPK3006 TPK0017 CBS 3l5 x 16 CBS 4 x 38 HANDLE SCREW PLASTIC STOPPER lil leseedslidsllom...
Página 8
Part List Not altual size TPK1004 TPK3001 TPK2005 DRAWER SLIDE 350 MM HANDLE WIRELESS CHARGER lil leseedslidsllom...
Página 9
Step 1 TPK0001 Insert hardware as shown belowl lil leseedslidsllom...
Página 10
Step 2 Proper orientaton of CAM LOCK TPK0001 TPK0004 TPK0002 Insert hardwares as shown belowl IMPORTANT! , Please insert Cam Bolt into smaller hole lil leseedslidsllom...
Página 11
Step 3 TPK1004 TPK0007 Insert hardware as shown belowl Slide (CL), screw positon on panel number 2. Slide (CR), screw positon on panel number 3. lil leseedslidsllom...
Página 12
Step 4 TPK0002 TPK0005 Insert hardware as shown belowl lil leseedslidsllom...
Página 13
Step 5 Proper orientaton of CAM LOCK TPK0002 TPK0004 Insert hardware as shown belowl lil leseedslidsllom...
Página 14
Step 6 Alach panel as shown below. Please fully tghten the Cam Lock. lil leseedslidsllom...
Página 15
Step 7 Alach panel as shown below. Please fully tghten the Cam Lock. lil leseedslidsllom...
Página 16
Step 8 Alach panel as shown below. Please fully tghten the Cam Lock. lil leseedslidsllom...
Página 17
Step 9 TPK0001 First, larefully turn up the unitl Selond, insert lam bolt as shown lil leseedslidsllom...
Página 18
Step 10 Alach panel as shown below. Please fully tghten the Cam Lock. lil leseedslidsllom...
Página 19
Step 11 Alach panel as shown below. Please fully tghten the Cam Lock. lil leseedslidsllom...
Página 20
Step 12 Alach panel as shown below. Please fully tghten the Cam Lock. lil leseedslidsllom...
Página 21
Step 13 Insert wireless lharger into the big holel TPK2005 lil leseedslidsllom...
Página 22
Step 14 TPK0008 TPK0007 TPK0017 USB lable slip underneath Turn down the unit as shownl For proper lable management, insert hardware as shown belowl Insert slrew as shownl IMPORTANT! Big hole on panel 14 must faling outsidel lil leseedslidsllom...
Página 23
Step 15 TPK0001 Insert hardwares as shown belowl lil leseedslidsllom...
Página 24
Step 16 Alach panel as shown below. Please fully tghten the Cam Lock. lil leseedslidsllom...
Página 25
Step 17 Alach panel as shown below. Please fully tghten the Cam Lock. lil leseedslidsllom...
Página 26
Step 18 Alach panel as shown below. lil leseedslidsllom...
Página 27
Step 19 TPK0008 Alach panel as shown below. Secure the panels using provided slrews lil leseedslidsllom...
Página 28
Step 20 TPK0007 TPK1004 Alach the slides (DL & DR) as shown. (DR) (DL) (DR) (DL) lil leseedslidsllom...
Página 29
Step 21 TPK3001 TPK3005 Alach the handles as shown lil leseedslidsllom...
Página 30
Step 22 Alach the drawers into carcass lil leseedslidsllom...
Página 31
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 100 lbsl 45 lg 25 lbsl 11 lg ealh drawer Warning: Risk of serious injury to person - do not place a television on this furniture. This furniture is not approved for use with a television.
Página 33
Español BubMMMtM MMMMMtMMM Busque en el interior del manual de montaje Búsquenos! páMMMM 2 Conserve este manual de montaje para futuras lonsultasl Se relomienda dos adultos para el montajel Este produlto no es para uso lomerliall No Regrese este produlto! Para piezas perdidas o rotasl Visitar: lilleseedskids.com Llamenos al: 1‐800‐489‐3351 (Grats) Lunes ‐...
Página 34
Español PáMMMM 9 Paso 1 _ Inserte el hardware como se muestra a contnuación. PáMMMM BB Paso 2 _ Inserte el hardware como se muestra a contnuación. ¡IMPORTANTE! Por favor inserte el perno de leva en un agujero más pequeño. PáMMMM BB Paso 3 _ Inserte el hardware como se muestra a contnuación.
Página 35
Español PáMMMM B6 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesionesl ADVERTENCIA: Riesgo de lesiones a las personas ‐ no coloque un televisor sobre muebles. EMtM muMbMM MM MMtá...
Página 36
Français MMpMt MvMMt Regardez à l’intérieur pour le manuel d’assemblage Délouvrez-nous! pMMM 2 Gardez le manuel d’assemblage pour référenle ultérieurel Deux adultes relommandés pour l’assemblagel Ce produit n’est pas destné à un usage commercial. Ne retournez pas le produit! Pour les pièles manquantes ou lasséesl Visitar: lilleseedskids.com Llamenos al: 1‐800‐489‐3351 (Grats) Lunes ‐...
Página 37
Français PMMM 9 Étape 1 _ Insérez le matériel lomme indiqué li-dessousl PMMM BB Étape 2 _ Insérez le matériel comme indiqué ci‐dessous. IMPORTANT! Veuillez insérer le boulon à came dans le pett trou. PMMM BB Étape 3 _ Insérez le matériel comme indiqué ci‐dessous. Faites glisser (CL), positon des vis sur le panneau 2. Faites glisser (CR), positon des vis sur le panneau 3l PMMM B2 Étape 4 _ Insérez le matériel lomme indiqué...
Página 38
Français PMMM B6 MAXIMUM DE CHARGE Cet appareil est conçu pour supporter la charge maximale enregistrée. Le dépassement de ces limites peut provoquer l’instabilité, l’effondrement et / ou causer des blessures graves. AVERTISSEMENT: Risque de blessures aux personnes ‐ ne placez pas la télévision sur les meubles. Ce mobilier est pas approuvé...