Televes HQAC Guia De Inicio Rapido página 4

Technical specifications
Encoder
MPEG2, H264 Auto, H264-High, H264 4.2, H264 5.0 or
Coding
H264 5.1
Interface 1 x HDMI
Video
Output Auto (no rescale), 1080pHR (rescale 1080p50/60 to
resolution 1080p25/30), 1080i, 720p, 576p, 576i, 480p, 480i
Bit rate 2 ... 50 Mbps
Interface 1 x HDMI
Audio Sample rate 44.1 or 48 kHz
Bit rate 96 ... 384 kbps
Modulator
Standard
DVB-T COFDM and DVB-C QAM
Modulation COFDM/QAM A
Frequency steps 125KHz, 166KHz or 250KHz
Frequency range 46 ... 862MHz (1KHz steps)
RF output level 60 ... 80 dBµV
RF loop 5 ... 900 MHz
USB
File system FAT 32 - High Speed 2.0 (*)
Recommended memory 32 GB (USB pen drive)
"video.ts" files only (in USB root)
Video play
System
Management Wifi interface 802.11 b/g
FW update USB
General
Power 12V 1.5A
Consumption < 1.1A
Dimensions 165 x 129 x 45mm
Weight 500g
Operating temp. 0 ... 30 ºC
Network adapter
Input voltage 100-240V~ 50/60Hz
Input current 600mA
Output voltage 12V 1500mA
Dimensions 100 x 48 x 67mm
Weight 160 g
(*) Televés does not guarantee full compatibility with all USB devices. Televés recommends using quality USB
devices.
Loop video play (USB):
1. Generate file named "video.ts" using the TScreator application. (Bit rate 2-50
Mbps).
2. Save file in USB pen drive root directory.
3. Insert USB in encoder.
4. The file will play automatically on the programmed channel. To stop playback,
remove pen drive or turn encoder off.
Updating equipment:
1. Download FW file from the Televés website.
2. Unzip and save file ("update.ufw") in the USB pen drive root directory.
Note: the file will be deleted after updating.
3. Insert USB in encoder.
4. Wait for the encoder to reset.
5. Check that the encoder has been updated correctly on the web interface.
Update fail: Emergency mode
Equipment enters emergency mode to protect from an update fail. To show this,
the Power LED will be fixed green, and Input and Output will flash orange. To
restore equipment, return to step 1 above.
DECLARACIÓN DE CONFORMIDAD DECLARATION OF CONFORMITY
CONFORMIDADE DECLARATION DE CONFORMITE
DEKLARACJA ZGODNOŚCI KONFORMITÄTSERKLÄRUNG
FÖRSÄKRAN OM ÖVERENSSTÄMMELSE ДЕКЛАРАЦИЯ СООТВЕТСТВИЯ
https://doc.televes.com
2019 © Copyright, Televés S.A.
HD Digital Encoder/Modulator
DECLARAÇÃO DE
DICHIARAZIONE DI CONFORMITÀ
ΠΙΣΤΟΠΟΙΗΤΙΚΟ ΣΥΜΜΟΡΦΩΣΗΣ
‫ةقباطملا نايب‬
Quick configuration
1. Connect the HDMI video source (STB) to the unit HDMI input.
HDMI
STB
2. Connect the unit RF output to the distribution network. Use loop if necessary
to combine the unit output with other signals in the distribution network.
Connect a load in the loop input if not used.
Power
DC-In 12V
OFF/ON HDMI USB IN
Imax = 800 mA
FW UPDATE
Fuse:
T 2A L 250V
Ref. 585401
3. Connect power source to the unit and mains.
4. Turn video source on (STB).
5. Check the wifi network is on (flashing "Power" LED). If not, press "wifi" button.
Switches off after 30 minutes inactive.
6. Connect with a PC/tablet/mobile to the unit wifi network ("DiMod_XXXXXX").
The network name is printed on the unit label with the serial number. The
wifi network password is "TelevesDiMod".
7. Once connected to the network, open a browser and go to the URL
"http://172.31.0.1", or "dimod.local" or "dimod", to log into the encoder
configuration web interface (login: "encoder", password: "encoder"). Users
canchange the password.
8. Configure desired parameters.
IMPORTANT: Select a free channel/frequency from the distribution network
for the unit RF output.
9. APPLY CONFIGURATION. There is no need to apply the configuration after
each change, you can apply it at the end from any section. The web will warn
you if data will be lost when you change section.
10. Check that the three LEDs are green. If any are not, check configuration,
video source, etc.
11. Tune TVs to access the channel generated by the unit.
HD Digital Encoder/Modulator
HD Digital Encoder/Modulator
Power
DC-In 12V
OFF/ON
Imax = 800 mA HDMI USB IN RF OUT RF IN
FW UPDATE
Fuse:
T 2A L 250V
Ref. 585401
RF OUT RF IN
Power
DC-In 12V
Imax = 800 mA OFF/ON HDMI USB IN RF OUT RF IN
FW UPDATE
Fuse:
T 2A L 250V
Ref. 585401