Replacing The Bulb - ANSMANN RC1 Instrucciones De Manejo

All manuals and user guides at all-guides.com
OperatiOn
If you want to use the torch, disconnect the bat-
tery pack from the mains. By pushing the slide
switch towards the head of the lamp, the torch is
switched on. The integrated magnet at the lower
part of the torch allows the lamps to be stuck to
metallic surfaces when in operation.
attention: the bulb is sensitive to shocks.
if the lamp drops, the thin lighting fila-
ment in the bulb may break. please re-
charge the lamp early enough when in
use. never leave the lamp switched on
with empty batteries as this may cause
damages to the battery pack.

replacing tHe BulB

Turn the head of the torch anticlockwise and
remove the reflector and the bulb. The bulb
can now easily be replaced. A spare bulb is
attached to the inside of the lamp head.
accessOries
Includes: blue carrying strap, 230 V power supply.
Charging electronics and 1,200 mAh/2.4 V batte-
ry pack are integrated in the torch. A mains adap-