Oxygenics TRISPA Instrucciones Para La Instalación

T S
RI PA
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise direction,
screw handheld holder
onto the taped portion
of shower arm. Hand
tighten only.
USING THE COMFORT CONTROL
Located on the back of the shower head, the comfort control regulator
eliminates sudden blasts of water. Note: The comfort control is not a shut off
valve. When turned to the lowest position, the shower head continues to flow.
This is a normal safety feature. Unit may be in lowest flow position during
shipping. Check the position of comfort control upon installation.
EASY TWIST SPRAY PRAY
SELECTION
Enjoying multiple spray patterns
during your shower has never
been easier. With the TriSpa's
easy twist design, simply rotate
the easy spray selector for a quick uick
spray change.
STEP 2
Remove any remnants
of old plumber's tape
and flush out shower
pipe for 5 to 10
seconds.
STEP 5
Attach end of hose to
handheld holder and
hand tighten.
ATTENTION:
WASHERS PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted
into both hose ends for
proper installation.
STEP 3
Wrap plumber's tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 6
Attach end of hose to
base of handheld and
hand tighten. Insert
your new handheld
shower in holder.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.