Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Splashproof Speaker
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous voltage within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING:
Users of this product are cautioned not to make modifications or changes that are not
approved by MEM-CE, LLC., doing so may void the compliance of this product and may result in the
loss of the user's authority to operate the equipment.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty
for this product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these Instructions.
2.
Keep these Instructions.
3.
Heed all Warnings.
4.
Follow all Instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any of the ventilation openings. Install in accordance
with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
HOW TO USE THE MEMOREX MW346
Congratulations on your purchase of the Memorex Outdoor Bluetooth
v3.0 Wireless Technology, makes it easy to take your tunes anywhere. Its IPX-4 Rated Splashproof Speaker and rechargeable
Lithium Polymer battery make it portable and water-resistant to use in outdoor environments. Built-in microphone and hands-free
speakerphone allow you to take calls from Bluetooth-enabled smartphones. Please follow these operational instructions carefully.
Save them for future reference.
Note: IPX4 Splashproof design is not waterproof and should never be immersed in water or used in a bathroom.
RECHARGEABLE BATTERY
The MW346 Outdoor Bluetooth
®
Splash Speaker features a built-in rechargeable battery that can be charged using the USB
Charging Port located on the back of the unit. Before first use, fully recharge the speaker for optimal performance and battery life.
Notes:
Connect charging cable (included) to a computer USB port or USB power adapter with 5V supply.
When connected to a power source, the blinking Red LED indicates the charging is in progress.
The Red LED will turn off when the integrated battery is fully charged.
The USB Charging Port (5V 1A DC) can be used to recharge other devices.
OPERATION
Pair a Bluetooth-Enabled Mobile Device
1.
Turn on MW346 by pressing and holding the Power On/Off Button located on top of the unit for 3 seconds. Once powered,
the speaker will automatically search for and pair to a Bluetooth® device.
2.
Turn on your mobile device's Bluetooth option in settings to search for a discoverable device with a Bluetooth signal. Select
MW346 from the device results on your smartphone or tablet.
3.
You will hear an audible tone indicating the Bluetooth connection is now enabled and the Blue LED will blink quickly when
in pairing mode and blink slowly when successfully paired.
4.
Use "0000" if a pairing code is necessary on your mobile device.
5.
Find your music selection on your mobile device, select play and enjoy!
If connection is lost after successful pairing, check to make sure the distance between speaker and Bluetooth-enabled device
does not exceed 30 ft/10 m. If the connection is interrupted due to low battery, switch the speaker off, recharge the internal
battery, and repeat steps when fully charged.
Note: When turned on and in Bluetooth source mode, the speaker will automatically try to connect to the most recently played
paired device when available.
Listen to Music/Answer A Phone Call
1.
When the Bluetooth-enabled device is paired, you can use your mobile device to Play and Pause music and control volume.
The sound will be heard through the speaker.
2.
You can also adjust the speaker volume level by pushing the "<" or ">" Volume Buttons and the Red LED will blink as you
press toward Max and Min volume levels.
Wireless
I'll Play Your Tunes
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long
periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14. WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. Do not place objects filled with
water, such as a vase, on the apparatus.
15. The AC mains plug is used as the power disconnect device and it
should remain readily accessible and operable during intended use. In
order to completely disconnect the apparatus from power, the mains
plug should be completely removed from the AC outlet socket.
®
Splash Speaker! The MW346, with built-in Bluetooth
Please read these instructions completely before operating this product.
3.
Lightly press the Power On/Off Button to Play or Pause Music. Use the Back Button 9 to select the previous track, and
the Next Button : to select the next track.
4.
When there is an incoming call, lightly press the Power Button to Answer or Hang Up the call. The built-in microphone can
be used as a speakerphone.
Listen to Music Using Line-In Source
1.
Insert one end of the audio cable (included) into the Line Out Jack (or Headphone Jack) on your external audio device and
the other end into the Line-In Jack on the micro speaker.
2.
Use the connected external audio device to play and pause music. Sound will be heard through the speaker.
3.
Adjust the speaker volume level either by pushing the ">" or "<" Volume Buttons on the top of the speaker, or by using the
volume controls on the mobile device.
Notes:
There will be no audible tone effects when connected to a Line-in source.
To maximize audio quality and minimize sound distortion, set your personal digital music device volume to high and use
the volume control on the MW346 speaker to adjust the listening level when connected to a Line-in source.
AUTO OFF
The MW346 will automatically shut off if there is no music from a Line-in source or from a Bluetooth-enabled device for more
than 20 minutes.
MAINTAINING YOUR SYSTEM FOR CONTINUED ENJOYMENT
When not in use, turn the speaker off. To extend the battery life of your external audio/mobile device, turn off the Bluetooth
signal when not in use.
Keep the unit away from direct sunlight and excessive heat.
Clean durable rubberized exterior with a damp soft cloth.
Protect your furniture when placing the unit on wood and lacquered finishes.
MODE
LED EFFECT
OFF
OFF
ON (Volume keys being pressed)
Blinking Red LED
Pairing
Blinking Blue LED
ON (Connected)
Solid Red LED
ON (Pairing Fail/Disconnect)
Blinking Red LED
TROUBLESHOOTING
Sound not clear or no sound
Check volume levels on both MW346 speaker and connected device.
Check distance between speaker and connected device.
Unit may need to be reset, press the RESET button.
Music doesn't transfer from external device to MW346
Make sure you are using a Bluetooth-enabled device.
Select the MW346 as your speaker device, disconnect speaker and device from pairing with all other devices.
Check if both devices are connected.
Restart the MW346 and auto connect with the Bluetooth-enabled device
LED will not illuminate
Make sure the internal battery has been charged.
Make sure power is on.
SPECIFICATIONS AND COMPATIBILITY
Frequency ..........................................................20Hz~20KHz
Transmission Range ................................................. 30ft/10m
Output Power.................................................................... 5W
Dimensions ...............................................230 x 90 x 130mm
LOCATION OF CONTROLS
®
LIMITED WARRANTY
MEM-CE, LLC. warrants this product against defects for 90 days from the date of original purchase. MEM-CE, LLC. shall not
be responsible for any lost data or other incidental or consequential damages related to this product. Some jurisdictions do not
allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so
the above limitations or exclusions may not apply to you. This limited warranty gives you specic legal rights, and you may have
other rights which may vary from one state, province or country to another.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR MEM-CE, LLC.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT: WWW.MEMOREX-CE.COM
OR CONTACT CUSTOMER SERVICE: For customers calling within the United States and Canada, call 1-855-982-2538
MEM-CE, LLC. 11485 Valley View Road, Eden Prairie, MN 55344 USA MEMOREX-CE.COM
Memorex and the Memorex logo are trademarks of Imation Corp and its affiliates. The Bluetooth
logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEM-CE, LLC. is under
license. All other trademarks are the property of their respective owners.
For additional setup, operating assistance or an electronic version of this user manual,
please visit www.MEMOREX-CE.COM
User Guide
MEMOREX-CE.COM
LED INDICATOR
Max/Min Volume Reached
Volume Button still being pressed
Low Battery
Charging
Line-in Audio source in use
Weight .............................................................................52g
Compatibility ....................................Compatible with Bluetooth
v2.1 + EDR (Enhanced Rate) or 2.1 Standard
Accessories ..........................USB Cable, Line-in Cable, Manual
1. Power On/Off Button
2. Back 9 Button
3. Volume < Button
4. LED Indicator
5. Volume > Button
6. Microphone
7. Next : Button
8. Line In Jack
9. USB Charging Port
10. DC Port
11. Reset Button
12. Splashproof Cover
MW346
Solid Red LED
Blinking Red LED
Blinking Blue every
30 seconds
Blinking Red LED
Solid Red
word mark and
®

Publicidad

loading

Resumen de contenidos para memorex MW346

  • Página 1 AUTO OFF The MW346 will automatically shut off if there is no music from a Line-in source or from a Bluetooth-enabled device for more WARNING: Users of this product are cautioned not to make modifications or changes that are not than 20 minutes.
  • Página 2 (servicio) importantes en la de música digital en alto y utilice el control de volumen del altavoz MW346 para ajustar el nivel de sonido cuando esté bibliografía que acompaña a la aplicación.