Brizo VETTIS Serie Manual Del Propietário

Models
T60P088
▲
Series
™
VETTIS
Write purchased model number here.
For easy installation of your Brizo
will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings,care, and
maintenance information.
Table of Contents:
Warranty ............................................................................... Page
Installation Instructions ......................................................... Pages 3 - 7
Maintenance ......................................................................... Page
Replacement Parts ............................................................... Page
CAUTION: This system/device must be set by the
installer to ensure safe, maximum temperature.
Any change in the setting may raise the discharge
temperature above the limit considered safe and
may lead to hot water burns.
NOTICE TO INSTALLER: CAUTION!–As the
installer of this valve, it is your responsibility
to properly INSTALL and ADJUST this
valve per the instructions given. This valve
does not automatically adjust for inlet
temperature changes, therefore, someone
must make the necessary temperature knob
adjustments at the time of installation and
further adjustments may be necessary due
to seasonal water temperature change.
YOU MUST inform the owner/user of this
requirement by following the instructions. If
you or the owner/user are unsure how to properly
make these adjustments, please refer to pages 4
& 5 and if still uncertain, call us at
1-877-345-BRIZO (2749).
After installation and adjustment, you must affix
your name, company name and the date you
2/16/17
91836
faucet you
®
You May Need
3/32"
(2.38mm)
adjusted the temperature knob to the caution label
provided and apply or attach the label to the back
side of the closest cabinet door and the warning
label to the water heater. Leave this Instruction
Sheet for the owner's/user's reference.
WARNING: This thermostatic bath valve is
designed to minimize the effects of outlet
water temperature changes due to inlet
pressure and temperature changes, commonly
caused by dishwashers, washing machines,
toilets and the like. It may not provide
protection from hot water burns when there
is a failure of other temperature controlling
devices elsewhere in the plumbing system, if
the temperature knob is not properly set or if
the hot water temperature is changed after the
settings are made or if the water inlet changes
due to seasonal changes.
WARNING: Do not install a shut-off device on
either outlet of this valve. When this type of
device shuts off the water flow, it can defeat
the ability of the valve to balance the hot and
cold water pressures.
1
MultiChoice
Installation Instructions
Owners Manual
Valve Trim
®
2
8
9
91836 Rev. A