Publicidad
Idiomas disponibles
Idiomas disponibles
1. PREPARE THE CABINET
NOTICE: Cabinet materials require specific preparation. Refer to the
cabinet manufacturer for instructions regarding proper
installation into the material.
1. Use the cut-out template supplied with your LidSaver dispenser to
cut the hole for the tube and drill the pilot holes for the mounting
screws.
2. INSTALL THE LIDSAVER
1. Push the sides of the bezel to release it from the plastic tabs. Pull the
bezel forward and tilt it downward allowing it to flex around the edge
of the open door..
2. Remove the bezel.
The Vollrath Company, L.L.C. Headquarters
1236 North 18th Street
Sheboygan, Wisconsin
53081-3201 USA
Customer Service: (800) 628-0830
Email: vollrathfs@vollrathco.com
Canada Customer Service: 800-695-8560
www.vollrath.com
3. Mount the LidSaver™ into your cabinet using the included screws.
4. Reverse steps 1-3 to re-install the bezel.
3. LOAD THE LIDSAVER
Load lids into the LidSaver™ dispenser. Refer to the instructions in the
Operator's Manual.
Pujadas
Ctra. de Castanyet,
132 P.O. Box 121
17430 Santa Coloma de Farners
(Girona) – Spain
Tel. +34 972 84 32 01
info@pujadas.es
©
2019 The Vollrath Company L.L.C.
LS03I Models
3 mounting screws
Vollrath of China
Vollrath Shanghai Trading Limited
Room 201, Building A
Xin Yi Plaza
1618 Yi Shan Road
Shanghai, 201103
China, P.R.C.
Tel: +86-21-5058-9580
LS03M Models
4 mounting screws
Vollrath de Mexico S. de R.L. de C.V.
Periferico Sur No. 7980 Edificio 4-E
Col. Santa Maria Tequepexpan
45600 Tlaquepaque, Jalisco | Mexico
Tel: (52) 333-133-6767
Tel: (52) 333-133-6769
Fax: (52) 333-133-6768
Part No. 8013226-1 ml
8/27/19
Publicidad
