Klein Tools IR1 Manual De Instrucciones página 3

To ensure safe operation and service of the tester, follow these
instructions. Failure to observe these warnings can result in severe
injury or death. Retain these instructions for future reference.
WARNING: LASER RADIATION. DO NOT STARE INTO BEAM.
Class II Laser.
• Exposing eyes to laser radiation can result in severe and permanent
eye injuries. NEVER look directly into the laser beam emitted by this
instrument.
• DO NOT use the instrument if the case is damaged in any way.
• DO NOT modify the instrument in any way, as to do so could result in
emission of hazardous laser radiation than could result in severe and
permanent eye injuries.
• DO NOT use optical equipment such as lenses, prisms, optical scopes,
etc. to transmit, retransmit, or view the laser beam as this could result in
severe and permanent eye injuries.
• This product should not be used in any location that could result in
somebody looking at or having their eyes inadvertently irradiated by the
laser beam as this could result in severe and permanent eye injuries.
• This product should not be used by untrained operators or operators who
have not read and fully understood the instructions.
• Thermometer is NOT intended for use on people or animals.
• DO NOT remove warning labels from this instrument as this could result
in serious personal injury and increases the risk of exposure to hazardous
laser irradiation.
• Discontinue using the instrument immediately if it is acting abnormally.
• Be cautious of infrared temperature measurements of reflective materials
as the instrument may indicate that these surfaces are cooler than their
actual temperature (see Emissivity section).
• There are no user serviceable parts in this instrument.
SAFE PRACTICES
This meter is designed for professionals who understand the hazards
associated with their trade. While this meter causes no foreseeable
dangers beyond its targeting laser, the objects being measured, as
well as the environment in which they reside, can be hazardous.
Common safety practices to follow when operating near temperature
critical environments are:
• Before using this meter, determine if an area is safe, verify correct operation
by measuring a known temperature value of a comparable object.
Warning label on side of thermometer
WARNINGS
3