KALLISTA P22503 Guia De Instalacion página 3

Bonnet
Shank
Spout
Gasket
1. Install the Faucet
Remove the tee from the shank by turning the tee
counterclockwise.
Remove the shank nut and shank washer from the shank.
Insert the shank through the faucet hole in the mounting surface.
From the underside of the mounting surface, slide the shank
washer and shank nut onto the shank.
Thread the shank nut up onto the shank until the shank nut is
flush against the mounting surface. Wrench tighten the shank nut.
Thread the tee onto the shank by turning the tee nut clockwise
until wrench-tight.
Kallista
Mounting
Surface
Shank
Washer
Tee
3 1025432-2-B