Mounting Instructions - Axis Communications T8122 DC Guia De Instalacion

Page 8

Mounting instructions

The AXIS T8122 may be wall or bench mounted using the rear side holes.
It can also be mounted on a DIN rail.
Note the following before mounting the AXIS T8122 to a fixed location:
• Do not cover the midspan or block the airflow to the product with any
foreign object. Keep the midspan away from excessive heat and
humidity, and free from vibration and dust.
• Ensure that the cable length from the Ethernet network source to
your Axis video product does not exceed 100 meters (333 feet). See
page 10 for information on cable lengths. The midspan is not a
repeater and does not amplify the Ethernet data signal.
• Use a splitter if required, but ensure that the splitter is connected
close to your Axis video product and not to the Midspan.
• There is no "on-off" switch; simply plug the AXIS T8122 into a DC
power outlet.
To mount:
1. Install two screws vertically at a distance of 65 mm
(2.5") on the wall or shelf.
2. Align the AXIS T8122 mounting slots to capture the
surface screws
AXIS T8122 DC 30W Midspan
A 6 to 7 mm (0.23" to 0.27")
B max 2.5 mm
C 2 mm to 3 mm (0.059" to 0.098")
D 3.0 mm (0.12")
A
B
c
D