Technical Specifications - BFT T-BOX Nstrucciones De Instalacion

1) GENERAL OUTLINE
The T-BOX is a 10-channel transmitter. Each channel is
wired electrical connection is needed. The T-BOX is
100 di erent CODES (each CODE consists of a sequen-
ce of min. 4 and max. 7 gures) and up to 10 di erent
activation CHANNELS, each CHANNEL corresponding
to a di erent control unit installed (e.g. sliding gate
SIGNAL INDICATIONS
Signal Heard
RED led xed after the correct code is entered
RED indicator LED
Green indicator LED

2) TECHNICAL SPECIFICATIONS

Batteries
:
No. of channels:
:
Transmission:
Range:
Degree of protection:
Dimensions
(*)
installation conditions.
INSTALLATION MANUAL
2X CR123A min.1400mAH
-10 +55 °C
10
433.92 MHz
Rolling Code
100m in open eld (*)
IP55
Fig. A
opening with channel 1 and overhead door opening
with channel 2). The T-BOX has a sensor which, in case
easier to enter the code.
WARNING: Keep the anti-tamper Allen key provided
in the kit.
Code entered correct/ memorisation on control unit
Code incorrect/error
3) INSTALLATION
WARNING:
Structures made from ferrous material could have an
adverse e ect on the T-BOX's operation.
-------------------------------------------------------------------
4) MEMORIZING ON CONTROL UNIT/RECEIVER
(Fig.C points 1-5).
ferent channel for each, entering the default codes.
Once that is done, change the codes.
-Change 1111 to 56561
-Change 2222 to 56562
-Change 3333 to 56563
overhead door A, 3 for overhead door B), therefore:
-ON -> 56561 OK -> opens the sliding gate
-ON -> 56562 OK -> opens overhead door A
-ON -> 56563 OK -> opens overhead door B
5) TOTAL DELETION OF CODES (Fig.D points 1-5)
Following the total deletion of all codes, T-BOX will need
ENGLISH
Meaning
(Fig.B points 1-6)
-
-
-
9
T-BOX -