Desktop Installation; Rackmount Installation - IC INTRACOM Intellinet Network Solutions 561273 Instrucciones

24-Port Desktop/Rackmount Gigabit Ethernet Switch
Rear Panel
Power
Use the included power cord to connect the device (on the rear panel) to an AC outlet.
The device supports AC 100 – 240 V, 50/60 Hz.
Chassis Ground Screw
Located on the right side of the power supply connector, the grounding terminal
connector is used to provide proper grounding for your Intellinet data switch. If you use
the chassis grounding screw, it should be wired to an object that provides earth ground.
In rackmount installations, grounding is typically provided by the metal frame of the
mounting rack.
Placement

Desktop Installation

Prior to use, it is recommended that the switch be placed/positioned on a level surface
with at least 25 mm (approx. 1") of clearance for ventilation; away from sources of
electrical noise: radios, transmitters, broadband amplifiers within 100 m (approx. 328')
of network devices it's to be connected to.

Rackmount Installation

The switch can be mounted in an EIA standard-sized, 19-inch rack.
Attach the mounting brackets on the switch's side panels (one on each side) and secure
them with the screws provided.
Use the screws provided with the equipment rack to mount the Intellinet data switch on
the rack.
English
3