Technical Data - physa VP-800 Manual De Instrucciones

CAUTIONS
Please read this user manual carefully.
Caution! Contact with hot surface may cause burns!
GENERAL SAFETY INFORMATION FOR THE USE OF ELECTRICAL DEVICES
To avoid injury from fire or electric shock, please make sure to follow these safety instructions when using the device. Please
read the instructions carefully and make sure that you have understood them well. Keep the manual at hand to be able to
read it again at any time. Always use grounded power outlets providing an adequate voltage (as indicated on the device). If
you have any doubt, let an electrician check that your outlet is properly grounded. Never use a damaged power cable. Do not
use the device in damp or wet environment, or if your hands or body are damp or wet. Protect the device from sunlight. Use
the device in a protected environment to avoid damaging the equipment or endangering others. Make sure the device can
cool down properly and avoid placing it too close to other heat-producing devices. Before cleaning, always unplug the device.
Use a soft damp cloth for cleaning. Avoid using detergents and make sure that no liquid enters the device. The inner elements
of this device don't require any maintenance from the user. An unauthorized opening of the device may void the guarantee.
SAFETY GUIDELINES
1. Please read and understand these instructions carefully before operating the device! Please observe the safety
guidelines carefully in order to prevent any damage due to improper use!
2. Please keep this manual at hand for future reference. If the device is handed over to third parties, this manual must
be handed over too.
3. Only use this device indoors and for its intended use.
4. The guarantee does not cover damages resulting from improper use or operation.
5. Before first use, ensure that the voltage and current requirements of the device match the available power supply.
6. This device should not be used by persons (including children) with limited physical, sensory or mental aptitude,
or lacking the necessary experience and/or knowledge – unless they are supervised by a qualified person or have
received safety instructions from this person.
7. ELECTRICAL SHOCK HAZARD! Do not attempt to repair the device yourself. In case of device failure, repair must
be done by a qualified professional.
8. Please check the main plug and power cable regularly. If the power cable is damaged, it has to be replaced by the
manufacturer or its customer service or another qualified person, in order to prevent hazards.
9. Prevent damages to the power cable by avoiding squeezing, bending or rubbing on sharp edges and keep it away from
hot surfaces and open flames.
10. CAUTION DANGER TO LIFE! During cleaning, never immerse the device in water or other liquids. Never put the
device under running water or pour other liquids on it. Never pour liquids over the lamp. If any liquid should get inside
the device, immediately unplug it and contact the service team.
11. Do not open the device under any circumstances.
12. Do not leave the device and its packaging unattended.
13. Make sure the water container is properly fastened to the device. If it is too tightly screwed, it may cause deformation
or damage.
14. When filling the container with water, avoid spilling water on the device.
15. In the event of a water leak during use, turn off the device immediately with the main switch and unplug it. Wait until
the device has cooled down and check if the water container is properly fastened to the device.
16. Before using the device always make sure that the steam temperature is appropriate (not too high), and that no steam
condensation is leaking from the nozzle!
17. WARNING! Never turn on the device without water in the container!
18. During use, regularly check the water level in the container. It must always be above the minimum level and under the
maximum level marked on the container.
19. To refill the water container, always turn the device off - turn off the steam and the ozone function.
20. To prevent burns, never remove the water container cap during use!
Rev. IV 2016
10

TECHNICAL DATA

Product name
Model
Art. No.
Rated voltage [V] / Frequency [Hz]
Power [W]
PURPOSE
The Facial Steamer VP-800 is a cosmetic device designed for SPA, beauty salons and wellness centres. It stimulates blood
circulation and opens the pores, thus cleaning, softening and moisturising the skin.
In case of damage resulting from an improper use of the device, the user shall assume all liability.
BEFORE FIRST USE
On receipt of the parcel, make sure the packaging is undamaged before opening it. If the packaging is damaged, please contact
your transport company and distributor within 3 days. Be as specific as possible when describing the damages. Do not turn
the package upside down! When transporting the package, please ensure that it is kept horizontal and stable. The packaging
materials (cardboard, plastic straps, polyurethane foam) should be kept at hand, so that the device can be sent back to the
service centre, if needed, in the best conditions!
ENVIRONMENT OF USE
The room temperature must not be higher than 45°C and the relative humidity should be under 85%. Keep the device away
from hot surfaces. Operate the device on flat, stable, clean, refractory and dry surfaces, out of the reach of children and
people with mental disabilities. Make sure that the power outlet is always within reach. The power outlet must be properly
grounded and match the technical requirements of the device.
Before first use, remove all elements and clean them.
OPERATING PRINCIPLE
1
2
3 4
5
6
1. steam nozzle
2. water container cap / herbs container
3. Ozone power switch
7
4. Steam power switch
5. heater
6. water container
7. base on wheels
Facial Steamer
VP-800
4104
230 V / 50 Hz
800
Rev. IV 2016
11