Control Panel - Hamilton Beach Commercial HVC406-CE Manual De Operación

The complete CE declaration of conformity documentation for this appliance is available in the
Technical Support section of our website www.hamiltonbeachcommercial.com.
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective
collection system conforming to the WEEE Directive so that it can be either recycled or dismantled in
order to reduce any impact on the environment. The user is responsible for returning the product to
the appropriate collection facility, as specified by your local code. For additional information regarding
applicable local laws, please contact the municipal facility and/or local distributor.

Control Panel

PROGRAM DISPLAY
Indicates program
number.
REPROGRAM
KEY
Activates
program
setting
changes.
PROGRAM SELECT
Scrolls between
programs.
4
FUNCTION SELECT
Selects VACUUM,
GAS, SEAL, or
SOFTAIR.
OIL PREHEAT
VACUUM INDICATOR
FUNCTION
Indicates vacuum mode
Initiates preheating
is selected or activated.
function.
GAS INDICATOR
Indicates gas mode is
selected or activated.
SEAL INDICATOR
Indicates sealing mode is
selected or activated.
SOFTAIR INDICATOR
Indicates soft air is
selected or activated.
DISPLAY
Shows active
function during
program cycle or
set value when
+/STOP VAC
idle. Shows
During cycle,
remaining time
stops vacuum
for each step
process and
in the process,
continues to next
error codes, or
process. Increases
maintenance
time when
reminders.
programming.
–/STOP
During cycle,
interrupts
process and ends
cycle. Decreases
time when
programming.
VACUUM GAUGE
Indicates the vacuum
pressure in the
vacuumed chamber.
ON (I)/OFF ( )
Turns the unit
on and off.