Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Model #
836W
Campbell Chair
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading the Assembly Instructions and Finishing Hints
before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
O O u u t t s s ide
ide U U . . S. or Canada:
S. or Canada: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 0 0 2 2 1 1 3 3
F F a a x: x: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 2 2 0 0 6 6 0 •
0 • www
M M a a i i l l : : P P .O .O. . B B o o x 28
x 282 2 7 •
7 • E E ugen
Completely read the Assembly Instructions and
Finishing Hints prior to beginning your project.
Store the parts: 1) in their box; 2) in a dry place;
3) in temperatures ranging from 40° to 90°. (Not on
a cold, possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
affect the stability of your furniture. Tighten or
repair as needed.
Production Code:
BZ
We will replace any
www. . w w h h i i t t t t ie ier r w w oo
ood d . . c c om
om
ugene e , , O O r r egon
egon 9 9 7 7 4 4 0 0 2, 2, U U . . S S . . A A . .
12/08

Publicidad

loading

Resumen de contenidos para Whittier Wood Furniture Campbell 836W

  • Página 1 Model # 836W Campbell Chair Assembly Instructions Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Página 2 Campell Chair — Parts List 836W Before beginning assembly, identify each part and make sure quantities received match what’s on this list. If you need to replace a part, please refer to the following list for its name and number or letter. 02 - Upper Back 03 - Front/Back Apron Qty - 1...
  • Página 3: Tools Required

    836W Campbell Chair ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Hex Wrench (provided), Phillips Screwdriver, Rubber Mallet or Padded Hammer, Wood Glue Fig. 1 1) Spread a thin layer of glue in the dowel holes of the Front/Back Aprons (03) and insert dowels (A). Gently tap with a padded hammer and quickly wipe up any excess glue with a damp rag.
  • Página 4 Fig. 3 3) Glue Left Side (04) to Right side assembly. See Figure 3. Fig. 4 Fig. 4a 4) Using the Hex Wrench (G) provided, insert six 7x50mm Hex Bolts (B) into the Left and Right Sides (04 and 05) as shown in Figures 4 and 4a. Insert two 4x30mm Flat Head Screws (E) through the front stretcher (06) and into each front leg.
  • Página 5 Fig. 5 Fig. 5a 5) Screw the Front Corner Blocks (08) and Rear Corner Blocks (07) into the appropriate corners with eight 4x30mm Pan Head Screws (D). The rear corner blocks are larger than the front blocks. Also, the rear blocks are marked with an “R” and the front blocks are marked with an “F”. See Figures 5 and 5a.
  • Página 6 Fig. 7 Fig. 7a 7) Glue six Wood Buttons (F) into the exposed holes. See Figures 7 and 7a. Page 6 — 836W — 12/08...
  • Página 7 Modelo No. 836W Silla Campbell Instrucciones para Armar Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 8 836W Silla Campbell Lista de piezas Antes de comenzar a armar el mueble identifique las piezas y compruebe que las cantidades recibidas son iguales a las de esta lista. Si necesita reemplazar una pieza, consulte la letra y el nombre o la lettra del modelo que vienen a continuación.
  • Página 9 No. de modèle 836W Chaise Campbell Politique de service : Nous remplacerons Instructions de Montage toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 10: Nomenclature Des Pièces

    836W Chaise Campbell Nomenclature des pièces Avant de commencer le montage, identifiez les pièces et assurez-vous que les quantités reçues correspondent à celles de cette liste. Si vous devez remplacer une pièce, veuillez vous référer à la liste suivante pour le nom et le numéro ou la lettre de la pièce.
  • Página 11 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers Rubber gloves to these questions may affect the type of finish you choose.
  • Página 12 Gluing Hints (cont.) 3. We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Tite- bond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.