Rubbermaid FASTTRACK 7W95 Manual De Instrucciones página 6

STEP 7
INSTALL SHELF
TIP: Use a magnetized tip screwdriver.
Lay the locker onto its side, hinge-side down, and open the door.
Position shelf (F) in any of the provided mounting positions.
NOTE: Slotted hole should be oriented towards the rear of the unit with the
round hole oriented towards the front of the unit.
Attach shelf (F) by inserting four shelf screws (L) into the molded-in nut on
the side panels.
1. Align and install front screws.
2. Align and install back screws.
1
STEP 8
INSTALLING THE LOCKER TO THE RAIL
NOTE: FastTrack rail is sold separately.
Place unit onto the rail in the location desired.
Tabs on the back of the top panel "hook" onto the rail.
NOTE: Be sure the FastTrack rail is installed per its instructions, and level.
2
F
6
F