Install Hood Mounting Screws; Mount The Hood; Install Duct Bracket - General Electric MONOGRAM ZV830 Instrucciones De Instalación

2 INSTALL HOOD MOUNTING SCREWS

The two upper mounting screws must enter the horizontal
support or wall studs.
pilot holes in 2 of the punched locations
1-1/4"
TOP
MOUNTING
NOTE: Top
HOLE
mounting
screws MUST
DRILL 1/8"
engage wood PILOT HOLE
support.
9-7/16" 15-7/16"
BOTTOM
MOUNTING
HOLE
Installation Height
Align Bottom Edge With
Pencil Line Indicating
Bottom of Hood
IMPORTANT:
•

3 INSTALL DUCT BRACKET

in place at the top.
Secure the bracket to the wall:
with the penciled centerline on the wall.
fastener supplier's instructions.
•
Centerline cutout
Installation Instructions
1-1/4"
10-1/16"
TOP
MOUNTING
NOTE: Top
HOLE
mounting
screws MUST
DRILL 1/8"
PILOT HOLE engage wood
support.
REAR WALL
MOUNTING TEMPLATE
15-7/16" 9-7/16"
C L
BOTTOM
MOUNTING
HOLE
Installation Height
Align Bottom Edge With
Pencil Line Indicating
Bottom of Hood

MOUNT THE HOOD

WARNING:
screws
Install
screws
10
2 people are required to lift and