Scheppach RT2300-Li18V Manual De Instrucciones Original página 13

Safety notices for the charger
m WARNING! Carefully read all safety notices and
instructions. Failure to comply with safety notices
and instructions can cause electric shock, fire and/
or severe injuries.
Store all safety notices and instructions for future
reference.
The term "power tool" used in the safety instructions
refers to mains-powered tools (with a mains cable)
and to battery-powered tools (without a mains cable).
WORK.AREA.SAFETY.
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
Iiquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders
operating.a.power tool. Distractions can cause you
to lose contro
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating.a.power tool. Do
not use.a.power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention white operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source and/
or the battery pack from the power toolbefore
making any adjust -ments, changing acces-
sories, or storing power tools. Such preventive
safety measures reduce the risk of starting the
power tool accidentaIly.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58  www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
• Store idle power tools out of the reach of chil-
• Maintain power tools. Check for misalignment
• the power tool's operation. If damaged, have the
• Keep cutting tools sharp and clean. Properly
• Use the power tool, accessories and tool bits
away while
CAREFUL HANDLING AND USE OF
BATTERY DEVICES
• Charge the batteries only in chargers that are
• In the power tools, use only the batteries de-
• Keep the unused battery away from paper clips,
• If used incorrectly, liquid may leak from the bat-
Service
• Have your power tool serviced by a.qualified
Safety notices for the line trimmer
• Warning! Remove stones, pieces of wood and oth-
• Ensure that bystanders are not injured by ejected
• Keep bystanders at a distance.
• Find safe footing, operate the device with both
• Guide the device gently through the area of the
• If possible, do not use on wet grass.
• Do not use the device in the rain or leave it in the rain.
• Do not use the battery-powered trimmer if the cover
• Before turning on the device, do not put hands or
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
or binding of moving parts, breakage of parts
and any other condition that may affect
power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
maintained cutting tools with sharp cutting edges
are less Iikely to bind and are easier to control.
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
recommended by the manufacturer. Risk of fire
if a charger that is suitable for a specific type of
battery is used with other batteries
signed for the purpose. The use of other batteries
may result in injuries and risk of fire
coins, keys, nails, screws and other small metal
objects, which could cause bridging of the con-
tacts. A short circuit between the battery contacts
may cause burns or fire
tery. Avoid contact with this. In the event of ac-
cidental contact, rinse off with water. If the liquid
gets into eyes, seek medical assistance. Leaking
battery fluid may cause skin irritations or burns
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained
er objects from the working area.
debris.
hands and turn it on.
lawn and try not to cut too much in one sweep.
is damaged.
feet in the area of the rotating parts.
13 І 56