Velleman PROCD3000 Manual Del Usuario página 2

• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
crash, etc. Using the device in an unauthorised way will void the warranty.
4. Description
a. Main unit
1. POWER SWITCH
Press the power switch to turn the unit on and to switch it off.
2. DISC TRAY
The disc is placed in the tray and the CD will be loaded automatically.
3. EJECT
Press to load or to eject the disc.
4. DISC ILLUMINATOR
Illuminates the disc.
5. AC INPUT
Connect the power cord to an AC wall outlet with proper AC voltage.
6. LINE OUT (output jacks)
Output from each CD player through RCA jacks.
7. CONNECTION PLUGS
The 8-pin connector permits the connection of the main unit to the control unit.
8. DIGITAL OUTPUTS
These are the digital RCA outputs for each CD player. Connect it to the line input of the D/A amplifier
9. START / PAUSE
Use this connector as a fader starter. Connect it to a mixer and remote control the START / PAUSE by moving
the mixer fader.
10. TACT / LOCK option
Select the type of switch in the mixer for FADER START wire remote control.
PROCD3000 2 VELLEMAN