Philips 9160XL Manual Del Usuario página 14

9160XLDFU_060705.qxd
ENGLISH
14
C
C
C
6/9/05 1:59 PM
Placing or removing razor from
charging stand:
◗ Always place razor in stand in an upright
position making sure charging contacts in
bottom of stand fit into recess in bottom of
razor.
◗ Always remove razor from stand by lifting
straight up. Do not tilt razor.
◗ Do not leave the charging stand with the
razor in it continuously plugged into outlet as
it would reduce life of batteries. If storing
razor in stand, remove the plug from outlet as
soon as the razor is fully charged.
1 Connect cord directly to razor or place
razor in charging stand and connect the
small plug of cord to charging stand.
Connect the charging plug into any 100V
to 240V AC outlet. Use only the charging
plug provided.
As you charge razor, the bottom light on the
display turns red. After approximately 3 minutes,
it will then turn green and blink. As charging
continues, more and more lights of the display
meter will briefly blink green and light up to
indicate what level of the batteries have been
charged.
Page 14 (Zwart plate)