Troubleshooting; Corrective Action; Warranty - Kobalt KPL 124B-03 Manual Del Usuario

TROUBLESHOOTING

WARNING
Place the switch trigger (B) in the OFF position and remove the battery before performing
troubleshooting procedures.
PROBLEM
The tool does not
work.
Planer does not
plane properly.
Motor overheating

WARRANTY

For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Low battery capacity.
1. The blade is dull.
2. Blades are not
installed correctly.
Cooling vents are
obstructed

CORRECTIVE ACTION

Charge the battery pack.
1. Replace the blade.
2. Install the blades correctly (see
Installing Planer Blades)
Clean and clear vents. Do not cover vents
with hand during operation
L G Sourcing, Inc. Mooresville, NC 28117
14
Printed in China