Chauvet Professional NOVASTAR VIP Drive Nova/VD43 Guía De Solución De Problemas página 8

EN
15. Press Send when ready. This is a fast send option, which will temporarily configure the video panel. Check that
the file is the correct one and does not need to be modified.
16. To make this configuration final, press Save.
To read a configuration from one video panel and send to another, follow the steps below.
17. Press the Read from Receiver Card button.
18. A window will appear to select the appropriate video panel.
a. Sending... refers to the VD43 or video processor that the video panel is connected to.
b. Port Number refers to the port on the sender the video panel is connected to.
c. Receiving Card refers to the order on the port the desired video panel is connected to.
19. Therefore, if you want the 3rd panel connected to the 2nd port on the 1st drive, select 1-2-3.
20. Press the Okay button to proceed. When it reads successfully, you will see the following:
21. Confirm that the settings that populate the configuration window are correct before proceeding.
22. Press Send to Receiver.
6
CHAUVET VIDEO PRODUCTS
Novastar Troubleshooting Guide
Revision 1