Use And Operation - oneConcept 10021807 Manual Del Usuario

Power Supply
• This unit is designed to operate on wither AC/DC adaptor.
• Insert the small plug of adaptor into the DC Jack.
• Insert the AC/DC adaptor in to any convenient having 230 V ~ 50 Hz household outlet .
Install the unit on wall
1. There are two wall mounting holes on the rear of the unit, push the stand as per the
marking on the stand to the channel of the unit before installing this product.
2. Please make sure your desired wall mount method is able to hold a 5 kg product if you are
going to put this frame on the wall. Seek advice from your local hardware professional.
3. Please ensure there are two stubs or nails on the walls with a distance same as the actual
product on the unit between each other.
4. Please ensure the stubs or nails for on the walls can support minimum 6 kg weight.
Clock setting
1. In STANDBY OFF mode, touch and hold the PROG/TIME SET Button, press SKIP+ or
SKIP- to desired 24H/12H. And press PROG/TIME SET button again
2. Touch SKIP- button to set the desired Hour.
3. Touch SKIP+ button to set the desired Minute.
4. After the desired time has set, touch PROG/TIME SET button to confirm.
Wake up to alarm buzzer (al 1)
1. Keep the unit in standby mode.
2. Touch the AL,SET button, „
AL.SET button again, the alarm time will blink on the display.
3. Touch the SKIP- BUTTON to set desired alarm hour.
4. Touch the SKIP+ BUTTON to set desired alarm minute.
5. The buzzer will sound at the set alarm time.
Wake up to radio/cd/buzz
1. Keep the unit in standby mode
2. Touch the AL.SET button, „
button again, the alarm time will blink on the display.
3. Press the SKIP- BUTTON to set desired alarm hour, then press the AL.SET button to move on.
4. Press the SKIP+BUTTON to set desired alarm minute, then press the AL.SET button to move
on. When the „
to wake up to.
5. Display showing "Radio" means alarm will be on with Radio.
6. Display showing "CD" means alarm will be on with CD. (Make sure the CD is already inserted.
7. The respective function will be turned on at the set alarm time.

Use and Operation

" icon will blink on the display, then touch and hold the
" icon will blink on the display, then touch and hold the AL.SET
" icon is blinking, press the SKIP+/SKIP- button to choose which function
13